|
|
  |
without head Indexing plungers |
GN 613 |
| Type A without lock nut, with knob | Type G without lock nut, with threaded rod |
| Type AK with lock nut, with knob | Type GK with lock nut, with threaded rod |
| d1 | d2 | d3 | d4 | l1~ | l2 | l3 | l4 | Spring load N~ | Code No. | |
| Plunger -0,02 -0,04 Bore H7 |
min. | initial | end | Screw driver | ||||||
| 5 | M 10 x 1 | 21 | M 5 | 45 | 5 | 22 | 6 | 7 | 16 | GN 613.1-5 |
| 6 | M 12 x 1,5 | 25 | M 6 | 54,5 | 6 | 26 | 10 | 6,5 | 15 | GN 613.1-6 |
| 8 | M 16 x 1,5 | 31 | M 8 | 69 | 8 | 34 | 12 | 12 | 31 | GN 613.1-8 |
| 10 | M 20 x 1,5 | 31 | M 8 | 80 | 10 | 43 | 12 | 23 | 54 | GN 613.1-10 |
| Specification | Information | How to order |
| Steel
blackened Plunger Knob |
Indexing plungers GN 613 are a low cost alternative
with much reduced dimensions.
Type G or GK with threaded plunger end are for applications where a special knob to customers' own design is required or for such cases where the spindle is linked direct to an operating mechanism. A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position. |
Indexing plunger GN 613-8-G Code
No. 613 |
|
|